Industrial thick aluminum plate (5–50mm) chips at corners and delaminates, scrapping offcuts. This article gives medium-low tooth-count TCG/step-tooth large-diameter aluminum blades with long-stroke grinder regrinding — reuse 3–5 times, corner-break defect down 50–70%.
For industrial thick aluminum plate (5–50mm) with corner chipping and delamination, use medium-low tooth-count TCG/step-tooth large-diameter aluminum blades with Lingbang long-stroke grinder regrinding — reuse 3–5 times, corner-break defect down 50–70%, saving offcut scrap.
An industrial aluminum plate processor mainly cuts 5–50mm thick plates and ingots on horizontal/vertical large aluminum cutters. Single pieces are heavy and high-value; thick-plate corner break scraps offcuts at high material cost. Blade diameter 800–1600mm, needing long-stroke equipment to regrind.
Lingbang long-stroke grinder covers large-diameter aluminum blades, SOP: deglue → check double runout → grind keep angle → polish, rotating blades, regrind when dull.
Lingbang regrind center accepts large blades, per-blade pricing with inspection report — for mills without large equipment.
Equip a long-stroke grinder for a line-side regrind station, rotating blades + regrind when dull — saves mail-in and downtime.
Mail large blades in batches, handover with before/after photos + inspection report — for occasional single blades.
Lingbang long-stroke grinder focuses on precision grinding of large-diameter saw blades. We offer free sample test grinding, factory visits and operator training, with the motto "Precision circular saw blade grinding — choose Lingbang for quality blades."
Precision circular saw blade grinding — choose Lingbang for quality bladesA: Choose step/TCG medium-low tooth-count blades with angle-keep sharp regrinding. Use Lingbang long-stroke grinder — corner-break defect down 50–70%, less offcut scrap.
A: Equip a Lingbang long-stroke grinder for on-site in-house regrind, or mail to Lingbang regrind center — both with inspection reports.
A: Covers large-diameter aluminum blades (commonly 800–2000mm), rotating blades + regrind when dull — suited to continuous thick-plate work.
A: Mainly on-site in-house to save mail-in, occasional large blade mail-in as backup. Combined cost ~35–50% of new.
Copyright © 2026 Dongguan Lingbang Machinery Technology Co., Ltd. All Rights Reserved.